Would you similar to ready your ain bar on your terrace or in your garden? A DIY Tiki Bar or outdoor bar is the perfect place to enjoy an aperitif with the family or take a refreshing drink with friends. This tutorial volition show yous how to build a tiki bar step by step and then you lot can enjoy it in the squeamish atmospheric condition.

The sun and warm days are conducive to spending more than time outdoors. Beingness able to do so while enjoying refreshing drinks makes it even better! And then, we have put together this tutorial to prove y'all stride by step how to build a tiki bar to be your family unit meeting point after work, or to enjoy information technology with friends on weekends.

DIY Tiki Bar: tools and materials

Materials for the DIY tiki bar project
  • Jigsaw and/or miter saw
  • Drill/screwdriver
  • Nailer and/or stapler
  • Clamp
  • Wooden slats and boards
  • Screws for wood
  • Paintbrush
  • Exterior wood varnish
  • Privacy screen

Cost, time & difficulty

The approximate cost of the materials is £lxxx, whilst the execution time is a full day and its level of difficulty is medium, every bit you lot need to take feel in treatment power tools.

DIY Tiki Bar step-by-step

To build this tiki bar or outdoor bar, we have mainly used wood and reed. This way, we get a very natural and warm result, which goes with almost outdoor environments.

Its dimensions are ideal for ii to iv people, merely if more space is needed, several can be built and joined together.

In addition, information technology has a tropical style blueprint that will bring freshness to your terrace or garden. The steps for this DIY tiki bar are detailed below.

Step 1 – Cutting the pieces

Get-go of all, cut the wooden strips and boards with a mitre saw or a jigsaw. The pieces we will need are:

  • 3.2 cm x 3.2 cm pine laths: 2 x 200 cm long for the rear vertical posts, ii x 180 cm long for the front vertical posts, iv ten 120 cm, 1 x 113 cm and 4 x 39 cm long to join the posts horizontally.
  • Pine wood strips 2.2 cm x 1.viii cm: 6 10 120 cm long and 12 x 39 cm long.
  • Pine boards: xi x xi 10 45 x 1 cm for the roof, 10 10 12 x 40 10 ane.8 cm for the bar top and 2 x xv x 46 x 1.8 cm cut at an bending of 33º to join the superlative of the posts.

Step 2 – Building the Tiki Bar structure


To build the structure, the vertical slats of 200 and 180 cm will be screwed to the horizontal slats of 120, 113 and 39 cm long, so that the vertical slats of 180 cm will exist placed at the front and the vertical slats of 200 cm at the back:

  • The 180 cm vertical slats will be placed at the front and the 200 cm vertical slats at the back.
  • One 120 cm horizontal crossbar at the front end and 2 39 cm horizontal battens at the sides shall be screwed affluent with the floor.
  • At a pinnacle of xc cm, a 120 cm forepart horizontal crossbar, a 113 cm rear horizontal batten and ii 39 cm side battens shall exist screwed to the front and 2 39 cm side battens shall be screwed to the rear.
  • The meridian of the vertical front battens shall be connected to 2 horizontal battens of 120 cm.
  • The next stride is to boom the two.two x ane.8 cm battens horizontally, leaving a distance of 10 cm between them. Then, the fifteen x 46 x i.eight cm boards cutting at an angle of 33° are screwed to the within of the upper battens.
  • Finally, the xi ten 45 x 1.8 cm boards are nailed to the upper horizontal battens to class the roof and the 12 ten 40 x i.eight cm boards are nailed to the battens at 90 cm high.

Stride three – Varnish information technology up

Side by side, use a stained varnish for exteriors. Information technology is recommended to apply a couple of coats to attain a meliorate protection of the wood, leaving the drying fourth dimension recommended past the manufacturer between coats. This will create a weather-resistant construction.

Varnish the tiki bar so it lasts longer

Footstep 4 – Stapling the cane

The concluding stride is to staple the cane effectually the bottom of the Tiki Bar so that it is securely attached to the slats and can withstand wind and pelting.

The reed is not only decorative and gives a tropical look, but also allows you to hide a small refrigerator or any y'all want to store backside the tiki bar.

Finally, after you have followed all the above steps, your DIY Tiki Bar is set for apply.

Hang some outdoor LED lanterns to prepare the ambiance and personalise your Tiki Bar with a sign or some bunting.

Add some accessories to your DIY tiki bar

Of grade, don't forget to celebrate with a few refreshing drinks and a toast that y'all have succeeded in making this beautiful and functional DIY Tiki Bar for your terrace or garden.

DIY tiki bar

Did you enjoy this commodity on how to DIY a Tiki Bar for your garden or terrace in four key steps? Why not read our tutorial on a DIY solar lamp fabricated from pallets or fifty-fifty our fairy light buying guide to deck out your new tiki bar!

Are yous making your own Tiki Bar besides? Share your finished results with us on Instagram using the #mymanomanoway, #manomanouk and #youvegotthis hashtags!